A replacement coil or pod only fits the device it is made for, so start with the name of your device and pick the coil or pod with that name. You can find the name printed on the device or its box. Then choose the resistance, shown in ohms (Ω):
| Resistance | Draw | Usually used with |
|---|---|---|
| 0.6Ω and up | Mouth-to-lung (MTL), tighter as the number goes up | 30ml and 60ml longfills |
| 0.4Ω and lower | Open, direct-to-lung draw | 120ml longfills |
Most of our replacement coils and pods are sold one at a time, from R50 to R95 each.
Step 1: find your device’s name
The name is usually printed on the device, on the old pod, or on the box. A coil or pod for a different device will not fit, even if the resistance is the same. Our product names list the devices each coil or pod is made for.
Step 2: pod or coil?
- Pod with a built-in coil. Many pod kits work this way. When the flavour fades, you replace the whole pod.
- Separate coil. Tanks, and some pod kits, take a coil that pushes into the tank or pod. When it wears out you replace only the coil.
- Empty pod. Some devices also have an empty pod that you fit with a separate coil.
The product page tells you which kind it is.
Step 3: choose the resistance
| Resistance | Draw | Usually used with | Longfills to match |
|---|---|---|---|
| 1.0 to 1.4Ω | Tight MTL | Salt 20–50mg or freebase 12–18mg | 30ml, 60ml |
| 0.6 to 0.8Ω | Looser MTL | Salt or freebase pod mixes | 30ml, 60ml |
| 0.4Ω and lower | Direct-to-lung | 2–6mg freebase | 120ml |
0.8Ω is the resistance our customers buy most. If you are replacing a pod you liked, pick the same resistance again. It is printed on the pod or the coil.
The replacements our customers buy most
| Coil or pod | Type | In stock now | Price |
|---|---|---|---|
| Vaporesso XROS Pod | Pod | 0.4Ω · 3ml, 0.6Ω · 3ml, 0.8Ω · 3ml, 1.0Ω · 2ml | R75 |
| OXVA XLIM pod (Top Fill ) - 3ml | Pod | 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω | R75 |
| Oxva Nexlim - 4ml pod replacements | Pod | 0.6Ω, 0.8Ω | R75 |
| OXVA V Prime - 5ml Replacement pods | Pod | 0.4Ω, dual mesh 0.4Ω, dual mesh 0.6Ω | R85 |
| Voopoo PNP X Replacement Coils | Coil | 0.15Ω, 0.3Ω | R70 |
| Geekvape Z Series Coil For Z (Zeus) Sub Ohm Tank | Coil | 0.2Ω XM, 0.4Ω, 0.4Ω XM | R70 |
| Smok RPM 3 mesh coils | Coil | 0.15Ω Mesh, 0.23Ω Mesh | R65 |
| Orca Vape San Dynasty - replacement pod + filter | Pod | 0.6Ω, 0.8Ω | R70 |
| Vaporesso GTX coils | Coil | 0.15Ω, 0.6Ω | R60 |
| SMOK RPM Coil Replacements | Coil | 0.4Ω, 1.0Ω, 1.2Ω Quartz | R60 |
This list updates itself: the replacements our customers bought most in the last 90 days that are in stock now, with today's prices (VAT included).
Can’t see your device? All of them are in Coils & Pods.
When to replace a coil or pod
Replace it when the flavour fades, or when it starts to taste burnt. Pods with a built-in coil are replaced as a whole. With a separate coil, you only replace the coil.
Quick answers
Will any 0.8Ω pod fit my device?
No. The resistance tells you how the coil vapes, not what it fits. The pod or coil must be made for your device.
Are coils sold in packs?
Most of ours are sold one at a time, as the product name says, so you can try one resistance before buying more.
My device isn’t listed. What now?
Send us its name on the Contact us page.
Looking for a new device instead?
See Kits – Mod & Tank.
Shop the range
Juicy Joes ships anywhere in South Africa: see Shipping & payment.